Recent content by Hard Charger

What bilge paint does Sonic use? Or what paint would match? I have some areas that need touched up versus painting everything in the bilge. Suggestions???

Yep they are Harland Sharp's HD 1.7:1. Thanks for the info.

I have a set of roller rockers that came off a Gen VI 502. There are no markings anywhere. Does anyone know who made them?

That's funny, because its true!

The Velocity decor is sweet. Real trees to offset the carbon output. That should make the tree huggers happy.

Cheapest change would be a spacer. I've had success with them before.

What propellers are you currently running?

It all depends on your setup. Is your boat a factory setup? Pleasure or race boat?

Same POS design the Frech use. Saw one back in 93'. That type of carrier only uses a jump jet like the Marine AV8B Harrier... Whatever ching a chang chow ching along ding dong! :biggrinjester:

I just pulled my 509 and plan on rebuilding it over the winter. The reason it was pulled was due to low compression on #4. The motor has over 300 hours on it. The motor is a Gen VI 502, bored 30, SRP 8:1 pistions, GM connecting rods & crank, mild roller cam, Merlin Rectangle Port Heads, Merlin...

The Corps is 235 years old today. Oorraahh to all you fellow Marines. Drink a cold one in celebration to were it all began at Tun Tavern. And have another one for all our brothers who paid the ultimate sacrifice.

Has anyone tried running a power glide or similar multi gear trans? If so what happened? I'm curious to know why it would or would not work. Thanks

I too went from a 2005 f250 6.0 diesel to a 2010 f250 gas v10 w/ 4.10 gears and 20" wheels. I've had it for about 1 month now. I was not pleased with the power range. So I did some research and found a tunner to buy from 5Star tunning. It woke the truck up big time and still run 87 octane. Fuel...

I'm considering installing an M-1 Procharger on my single engine 28' Sonic. My motor is a gen VI 509 cubic inches, merlin heads, merlin intake, imco exhaust, holley 800cfm carb with 315 hours. Roughly 550 reliable hp. My cruise speed is 50 and my max is 70mph. I want to increase my overall...

If you don't have it already you might want to add hydraulic steering. Cable steering sterndrives will start flapping around at those speeds resembling chine walking. That was the issue I had with my Python.